OVERVIEW

STOCK LIST

SPECS

Chrome Plated ID Tubing is produced from Drawn Over Mandrell (DOM) or Cold Drawn Seamless (CDS) in 1020/1026 or ST52.3 grades. The inside diameters are polished, and chrome plated to a thickness of .0005” - .001”. Custom diameters and chrome plating can be made to your specifications.

  • Made from C1020, 1026, or ST52.3
  • Metric Sizes available
  • Stocked in 12’ – 24’ lengths
  • Cut to length services available
  • Stocked Hard Chrome Plated thickness per side: .0005” and .001”
  • Precision tolerances and surface finish
  • Custom sizes and chrome thickness available
  • Hardness of Rc 60-72, and a surface finish of 16 RMS maximum

applications

 

 

Shipping and Packaging

We are committed to ensure your orders are
shipped on time and in good condition.

See our shipping and packaging options

STock List

Chrome Plated ID tubes

Chrome Plated ID tubes

Chrome
Inside
Diameter Inches
Nominal
Outside 
Diameter Inches
Theoretical
Wall Inches
Weight
Per Foot (lbs)
2.000 2.250 0.125 2.837
  2.375 0.188 4.380
2.250 2.500 0.125 3.171
2.500 2.750 0.125 3.504
  2.875 0.188 5.382
3.000 3.250 0.125 4.172
  3.375 0.188 6.383
  4.000 0.500 18.690
3.250 3.500 0.125 4.506
  3.875 0.313 11.890
3.500 3.875 0.188 7.384
  4.000 0.250 10.013
4.000 4.250 0.125 5.507
  4.375 0.188 8.385
  4.500 0.250 11.348
  4.750 0.375 17.522
5.000 5.250 0.125 6.842
  5.500 0.250 14.018
6.000 6.250 0.125 8.177
  6.500 0.250 16.688
8.000 9.250 0.625 57.572
**Subject to Availability

Customer Feedback

“I'm over all extremely pleased with Team Tube all around as a great vendor!!” 

steve, kentucky

  • Composition & Strength
  • Diameter & Ovality Tolerances
  • Straightness Tolerance
  • Wall Tolerances

Composition & Strength

Chrome Plated ID Tubing
ASTM A513 Type 5

Test Reports available on request

Grade Chemistry        % Yield Tensile Elongation Typical Hardness
      PSI PSI % in 2" section Min
1020 Carbon 0.150 - 0.200 60,000 70,000 10 B-75
  MN 0.300 - 0.600        
  P 0.035 Max        
  S 0.035 Max        
1026 Carbon 0.220 - 0.280 70,000 80,000 10 B-80
  MN 0.600 - 0.900        
  P 0.035 Max        
  S 0.035 Max        
 ST52.3 Carbon  0.140 - 0.180  75,000 85,000  15  B-80
  Si 0.150 - 0.300        
   MN  1.200 - 1.400        
   P  0.020 max        
   S  0.010 max        

Diameter & Ovality Tolerances

ASTM A513 Type 5

OD Wall: OD Inches ID Inches
Size Range Percent of OD Plus Minus Plus Minus
Up to 0.499 All 0.004 0.000    
0.500-1.699 All 0.005 0.000 0.000 0.005
1.700-2.099 All 0.006 0.000 0.000 0.006
2.100-2.499 All 0.007 0.000 0.000 0.007
2.500-2.899 All 0.008 0.000 0.000 0.008
2.900-3.299 All 0.009 0.000 0.000 0.009
3.300-3.699 All 0.010 0.000 0.000 0.010
3.700-4.099 All 0.011 0.000 0.000 0.011
4.100-4.499 All 0.012 0.000 0.000 0.012
4.500-4.899 All 0.013 0.000 0.000 0.013
4.900-5.299 All 0.014 0.000 0.000 0.014
5.300-5.549 All 0.015 0.000 0.000 0.015
5.550-5.999 Under 6 0.010 0.010 0.010 0.010
  6 and Over 0.009 0.009 0.009 0.009
6.000-6.499 Under 6 0.013 0.013 0.013 0.013
  6 and Over 0.010 0.010 0.010 0.010
6.500-6.999 Under 6 0.015 0.015 0.015 0.015
  6 and Over 0.012 0.012 0.012 0.012
7.000-7.499 Under 6 0.018 0.018 0.018 0.018
  6 and Over 0.013 0.013 0.013 0.013
7.500-7.999 Under 6 0.020 0.020 0.020 0.020
  6 and Over 0.015 0.015 0.015 0.015
8.000-8.499 Under 6 0.023 0.023 0.023 0.023
  6 and Over 0.016 0.016 0.016 0.016
8.500-8.999 Under 6 0.025 0.025 0.025 0.025
  6 and Over 0.017 0.017 0.017 0.017
9.000-9.499 Under 6 0.028 0.028 0.028 0.028
  6 and Over 0.019 0.019 0.019 0.019
9.500-9.999 Under 6 0.030 0.030 0.030 0.030
  6 and Over 0.020 0.020 0.020 0.020
10.000-10.999 All 0.034 0.034 0.034 0.034
11.000-11.999 All 0.035 0.035 0.035 0.035
12.000-12.999 All 0.036 0.036 0.036 0.036
13.000-13.999 All 0.037 0.037 0.037 0.037
14.000-15.000 All 0.038 0.038 0.038 0.038

 

Ovality shall be within the above tolerances except when the wall thickness is less than 3% of the OD.

In those cases the additional ovality shall be as follows, but the mean diameter shall be within the specified tolerance.

Outside
Diameter
Additional
Ovality 
Tolerance
Outside 
Diameter
Additional 
Ovality 
Tolerance
Up to 2"  0.010" 7" - 8" incl. 0.040"
2" - 3" incl. 0.015" 8" - 9" incl. 0.045"
3" - 4" Incl. 0.020" 9"-10" incl. 0.050"
4" - 5" incl. 0.025" 10"-11" incl. 0.055"
5" - 6" incl. 0.030" 11"-12" incl. 0.060"
6" - 7" incl. 0.035" 12"-12.5"incl. 0.065"
 

Straightness Tolerance

ASTM A513 Type 5

Outside Diameter Tolerance for any 3' of Length
< 8.000" 0.030"
≥ 8.000" 0.060"

Wall Tolerances

ASTM A513 Type 5

Wall Thickness
Including .375" to .875" OD

Over .875" to 1.875" OD

Over 1.875" to 3.750" OD

Over 3.750 "to 15.000" OD
(Inches) Plus Minus Plus Minus Plus Minus Plus Minus
0.035 0.002 0.002 0.002 0.002 0.002 0.002    
0.049 0.002 0.002 0.002 0.003 0.002 0.003    
0.065 0.002 0.002 0.002 0.003 0.003 0.003 0.004 0.004
0.083 0.002 0.002 0.002 0.003 0.003 0.003 0.004 0.005
0.095 0.002 0.002 0.002 0.003 0.003 0.003 0.004 0.005
0.109 0.002 0.003 0.002 0.004 0.003 0.003 0.005 0.005
0.120 0.003 0.003 0.002 0.004 0.003 0.003 0.005 0.005
0.134     0.002 0.004 0.003 0.003 0.005 0.005
0.148     0.002 0.004 0.003 0.003 0.005 0.005
0.165     0.003 0.004 0.003 0.004 0.005 0.006
0.180     0.004 0.004 0.003 0.005 0.006 0.006
0.203     0.004 0.005 0.004 0.005 0.006 0.007
0.220     0.004 0.006 0.004 0.006 0.007 0.007
0.238     0.005 0.006 0.005 0.006 0.007 0.007
0.259     0.005 0.006 0.005 0.006 0.007 0.007
0.284     0.005 0.006 0.005 0.006 0.007 0.007
0.300     0.006 0.006 0.006 0.006 0.008 0.008
0.320     0.007 0.007 0.007 0.007 0.008 0.008
0.344     0.008 0.008 0.008 0.008 0.009 0.009
0.375         0.009 0.009 0.009 0.009
0.400         0.010 0.010 0.010 0.010
0.438         0.011 0.011 0.011 0.011
0.460         0.012 0.012 0.012 0.012
0.480         0.012 0.012 0.012 0.012
0.531         0.013 0.013 0.013 0.013
0.563         0.013 0.013 0.013 0.013
0.580         0.014 0.014 0.014 0.014
0.600         0.015 0.015 0.015 0.015
0.625         0.016 0.016 0.016 0.016
0.650         0.017 0.017 0.017 0.017

 

Steel Distributor
Website Design